Latest topics
RUST FIX (HOW TO) door skin inside edge.
3 posters
Page 1 of 1
RUST FIX (HOW TO) door skin inside edge.
(WARNING)
SOME PICS MAY BE DISTURBING TO THE PURIST, as some parts are destroyed to make a good piece.
I was asked how to fix the rusted lip of the skin on the inside. so I'll do a short how to here.
first the rust pics. then I'll get it striped and the rust off it and will have more pics of the fix
wire wheel/grind out all the rust, then wash/blow it out , epoxy it.
(LOOK AWAY AT THIS POINT)
you need a junk lid with a good donor piece
more later
SOME PICS MAY BE DISTURBING TO THE PURIST, as some parts are destroyed to make a good piece.
I was asked how to fix the rusted lip of the skin on the inside. so I'll do a short how to here.
first the rust pics. then I'll get it striped and the rust off it and will have more pics of the fix
wire wheel/grind out all the rust, then wash/blow it out , epoxy it.
(LOOK AWAY AT THIS POINT)
you need a junk lid with a good donor piece
more later
4SPEED- Member
- Posts : 176
Join date : 2010-05-08
Age : 54
Location : Greenville, Ohio
Re: RUST FIX (HOW TO) door skin inside edge.
I'm going to spare you the details of the other lid.
add some glass filler , and some elbow grease and you'll be ready to seam seal it. and done
3m seam sealer. comes in a tube of caulk. about 18 to 20 bucks. dont use the el'cheap'o crap. it drys out and cracks.
already have the doors done
add some glass filler , and some elbow grease and you'll be ready to seam seal it. and done
3m seam sealer. comes in a tube of caulk. about 18 to 20 bucks. dont use the el'cheap'o crap. it drys out and cracks.
already have the doors done
4SPEED- Member
- Posts : 176
Join date : 2010-05-08
Age : 54
Location : Greenville, Ohio
Re: RUST FIX (HOW TO) door skin inside edge.
Doug, Great Post. This is the kind of stuff that everyone is always looking for. Great How to.
Thanks
Rick H
Thanks
Rick H
Re: RUST FIX (HOW TO) door skin inside edge.
thanks guys , I try to do some other How To's from my 77 build.
PM or post up some suggestions.
PM or post up some suggestions.
4SPEED- Member
- Posts : 176
Join date : 2010-05-08
Age : 54
Location : Greenville, Ohio
Re: RUST FIX (HOW TO) door skin inside edge.
well its done , other then a 400 then 600 grit sanding before paint.
4SPEED- Member
- Posts : 176
Join date : 2010-05-08
Age : 54
Location : Greenville, Ohio
Re: RUST FIX (HOW TO) door skin inside edge.
Nice work on that rust.
You do some high quality body work.
I wish you were located in Connecticut instead of Ohio because I would ask you to do some body work for me...lol
You do some high quality body work.
I wish you were located in Connecticut instead of Ohio because I would ask you to do some body work for me...lol
Similar topics
» Fbody “Buyers Guide” VIDEO Where to look and what to look for rust wise!!
» Wanted a nice rust free unmolested 76-1979 Black LE/SE Car w/T-Tops or TATA
» Need Power Door Lock Switch
» "How To:"Install Door Handle Decals
» "How To:" Install dome light door triggers!
» Wanted a nice rust free unmolested 76-1979 Black LE/SE Car w/T-Tops or TATA
» Need Power Door Lock Switch
» "How To:"Install Door Handle Decals
» "How To:" Install dome light door triggers!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Mon Nov 24, 2014 10:11 pm by The Firebird
» NWS Statements
Tue Jul 22, 2014 6:58 pm by The Firebird
» PVFA upcoming events
Thu Jun 26, 2014 4:45 am by TA78
» Car Show August 3 Raynham MA
Wed Jun 25, 2014 3:55 pm by BanditRich
» Pioneer Valley Firebirds Events 2014
Tue Jun 17, 2014 11:47 pm by Steve
» 7th ANNUAL NECF POTLUCK COOKOUT, Sunday, June 15, 2014
Tue Jun 17, 2014 2:48 pm by The Firebird
» PVGTOA 16th Annual Show 6/1 Agawam Mass.
Wed May 28, 2014 6:13 pm by TA78
» '84 Recaro T/A, 5 speed, uber-rare Y81 Ttop-Delete, $1950
Thu May 08, 2014 2:50 pm by The Firebird
» Dream Car Sprint
Tue May 06, 2014 10:16 pm by Steve
» Grease Monkey Garage
Fri May 02, 2014 6:05 pm by tajoe